10287333 Rexnord Omega E5 Coupling

The 10287333 Rexnord Omega E5 Coupling Element, also identified by Rexnord catalog number 7300020, is an OEM elastomeric flexible element for the Rexnord Omega close-coupled drive coupling system. The element transmits operational torque between two hubs mounted on connected shafts while absorbing torsional vibration and compensating for the angular and parallel shaft misalignment that develops during normal operation, thermal expansion, and equipment settling. The split-in-half element design allows installation and replacement without disturbing the hubs, shafts, or connected equipment, which reduces downtime during scheduled maintenance.

The Omega E5 element serves across a wide range of industrial power transmission applications including centrifugal and reciprocating pumps, centrifugal and reciprocating compressors, industrial fans and blowers, forced draft fans, mixers and agitators, cooling tower drives, metal extruders, conveyor drives, and motion control systems. The coupling operates in both horizontal and vertical shaft orientations without modification or additional components and requires no lubrication, eliminating the maintenance and contamination risks associated with grease-packed gear couplings.

The standard 10287333 element is supplied in orange polyurethane, formulated for high misalignment capacity and broad chemical resistance to oils, greases, and common industrial fluids. Rexnord also produces the Omega E5 in two specialty compounds for demanding service conditions: the Heavy Duty Yellow (HDY) compound delivers approximately 25 percent greater torque capacity for higher-load applications, and the Hydrolytically Stable Urethane (HSU) green compound is engineered for hot and humid environments where standard urethane degrades prematurely.

When to replace the Omega E5 element: Inspect the coupling at every scheduled service interval and watch for symptoms including elevated vibration during loaded operation, audible rumbling or knocking from the coupling area, visible cracking or hardening of the urethane element, permanent set or deformation of the element profile, and signs of element wear at the hub contact points. Replace the element at the first sign of wear to protect the bearings, shaft seals, and connected equipment from accelerated wear caused by uncontrolled torsional spikes passing through the drivetrain.

Direct OEM Rexnord replacement. Hubs sold separately. Available from Stark Industrial Products with same-day shipping on in-stock orders and 24/7 phone support at (903) 768-1111 to confirm element size and compound for your application.